How To Clean Vinyl Seat Before Painting

How to Recondition Vinyl Seats

past Brenda Priddy

Monkey Business Images Ltd/Valueline/Getty Images

Without proper care, vinyl seats can become hard, croaky and brittle. You can recondition the vinyl and give information technology new life with a unproblematic cleaning and conditioning process. Once the vinyl is clean and conditioned, you can then repair any cracks in the surface of the vinyl. However, if you try to repair cracks before the vinyl is conditioned, the repair will go badly and may even increase the damage to the surface of the vinyl seat.

Step one

Make clean the surface of the vinyl seats with vinyl cleaner or with warm water and a few drops of dish soap. Piece of work the cleaner into the surface of the vinyl with a soft material. Clean and dry the vinyl thoroughly until the cloths no longer come away dirty or gray.

Footstep 2

Remove any mildew or mold growing on the vinyl with a mixture of i tbsp. ammonia, ¼ cup hydrogen peroxide and 3/four loving cup water. Pour this mixture into whatsoever container you lot have on hand or use your sink. Work the ammonia mixture into the vinyl with a soft-bristle brush to remove the mildew from the vinyl. Rinse with h2o, then dry with former towels. Allow the seats to dry completely.

Step three

Spray vinyl handling directly onto the vinyl. Work the treatment into the pores of the vinyl with a soft cloth. Permit the treatment to soak into the vinyl for most five minutes. Rub the treatment spray into the vinyl seats for several minutes. Allow the handling spray to dry out for 1 or ii hours in the sun. Practice non sit on or touch on the vinyl until the surface of the vinyl is dry out.

Stride 4

Utilise a second coating of vinyl treatment if the vinyl is still dry and stiff. Continue to add together more conditioning treatment until the vinyl is soft and supple again. The vinyl treatment not only softens the vinyl but also protects the vinyl from sun harm, mildew and other stains.

Make clean and status the vinyl almost once a month later on the initial conditioning. This volition prevent the vinyl from drying and cracking, deep stains and other problems that usually bear on vinyl items.

References

Things You'll Need

Author Bio